SEI Industries Bambi Bucket Series Service Manual

Section 8: Repairs
Bambi Bucket Service Manual – Models 6072-1821 34
10. Once the tripline has passed through the trip block,
bend the end of the tripline into a tight spiral using a
pair of pliers.
11. Insert the end of the tripline through the large centre
hole of the drum. Fish the tripline out through the
small hole to the right of the centre hole using a flat
screw driver. Guide the end of the swage block out
through the hole.
12. Pull 12-14" (300-350 mm) of line from the hole and
pull it around the drum in a clockwise motion. Insert
the tripline into the small hole to the left of the larger
hole, when facing the head.
13. Locate the locking finger in the large centre hole of
the reel. Push the swage on the end of the tripline
past this locking finger.

SEI Industries Bambi Bucket Series Specifications

General

Brand	SEI Industries
Model	Bambi Bucket Series
Category	Other
Language	English