SEI Industries Bambi Bucket Series Service Manual

Section 8: Repairs
Bambi Bucket Service Manual – Models 6072-1821 36
17. While holding the reel securely, release the temporary
lock. Allow the cable to wind in gradually. Do not
let the reel free-wheel. Use gloves to protect your
hands from injury.
18. Release the catch by pushing the solenoid up, then
pull the tripline out 3-4 ft and return it to the retracted
position. Repeat four to five times to test the
function, then replace the cover.
Spring Reel Replacement
To remove the old spring reel, follow these procedures:
1. Remove the tripline as per Tripline Replacement instructions in this manual.
2. Wear gloves to protect your hands. Hold the spring
reel firmly and remove the clamp or other locking
device.
3. Release the tension gradually until the reel is
completely unwound.
CAUTION
The spring reel must be unwound before its securing nut is loosened. Loosening the nut on a wound
spring reel could result in damage to the reel and/or injury to your hands.

SEI Industries Bambi Bucket Series Specifications

General

Brand	SEI Industries
Model	Bambi Bucket Series
Category	Other
Language	English