SEI Industries Bambi Bucket Series Service Manual

Section 8: Repairs
Bambi Bucket Service Manual – Models 6072-1821 40
M-Strap Replacement
Replace M-straps if they become noticeably worn. M-straps may be repaired, if frayed, by melting the
fray with a lighter to stop the fray from spreading. The length of the M-strap is critical to the Bambi
Bucket functioning correctly. It is recommended that you replace worn straps with factory-supplied
equipment.
There are two types of straps. The short straps are vertical and are a continuous loop. The long straps are
diagonal and have a loop on each end.
Replace one set of straps at a time to avoid confusion.
1. Cut off the old strap from the shackle.
2. Using needle nose pliers, insert the tip under the top
webbing layer.
3. Fully insert the pliers at the far left hand side of the
top layer.
Short straps (vertical)
Long straps (diagonal)

SEI Industries Bambi Bucket Series Specifications

General

Brand	SEI Industries
Model	Bambi Bucket Series
Category	Other
Language	English