Section 3: Accessories
Bambi Bucket Service Manual – Models 2024-4453 13
Sacksafoam Heli-Case
The Sacksafoam Heli-Case is a self-contained unit that can be
stowed onboard the helicopter. The foam concentrate is stored
in a 20 USG tank inside a large plastic case with provision for
an extra 5 USG container. The case is designed to prevent
foam from contacting the helicopter.
The Sacksafoam Heli-Case interfaces with the Sacksafoam
controller which can be mounted directly in control panel or
externally by using the supplied blanking plate and harnesses.
Dispensing can be controlled directly from the Sacksafoam
controller screen or using the remote control grip.
The Sacksafoam Heli-Case can also interface with the Bambi Bucket, allowing the bucket to be actuated
using the trigger on the remote control grip.
Foam Compatibility
The Bambi Bucket is designed to be effective with foam. All materials used in the manufacture of the
Bambi Bucket are resistant to the chemical action of foam.
After using foam or retardant in the bucket, it should be washed with fresh water to remove all residue.
Foam and retardant can accelerate corrosion and degradation of materials if not removed.
To Next Page
Loading...