To Next Page
M
Mrs. Sarah MorrisAug 13, 2025
What to do if my Seiko I Infotech LP-1020 has a paper jam?
- KKaren VasquezAug 13, 2025
If your Seiko I Infotech Plotter has a paper jam, open the door of the indicated number and remove the paper.
What to do if my Seiko I Infotech LP-1020 has a paper jam?
If your Seiko I Infotech Plotter has a paper jam, open the door of the indicated number and remove the paper.
What to do if my Seiko I Infotech Plotter has no power?
First, ensure the power cable is correctly plugged into the outlet. If it is, check that the outlet is receiving power.
Why is my Seiko I Infotech Plotter frequently jamming paper?
Make sure the paper type setting matches the type of paper loaded. Also, ensure the paper roll is loaded correctly and that there is no foreign material in the paper path.
Why is my Seiko I Infotech LP-1020 Plotter plotting deleted parts of the image?
This issue may occur if the loaded paper type doesn't match the type specified on the panel, if the paper contains moisture, or if you are not using the recommended paper. Replace the paper or change the setting. Cut the end of the rolled paper and retry plotting. Use the recommended paper.
How to fix Seiko I Infotech LP-1020 Plotter failing to plot transmitted data immediately?
Review the time-out setting.
How to troubleshoot no power on Seiko I Infotech LP-1020 Plotter?
If your Seiko I Infotech Plotter has no power, ensure the power cable is correctly plugged into the outlet and that the outlet is receiving power.
Why does my Seiko I Infotech LP-1020 have frequent paper jams?
If your Seiko I Infotech Plotter frequently experiences paper jams, verify that the paper type setting matches the loaded paper. Also, ensure the paper roll is loaded correctly and check for any foreign material in the paper path. Remove any obstructions if found.
Why Seiko I Infotech LP-1020 fails to plot transmitted data immediately?
If your Seiko I Infotech Plotter fails to plot transmitted data immediately, review the time-out setting, especially if the DATA lights are on or flashing.
General| Model | LP-1020 |
|---|---|
| Category | Plotter |
| Print speed | Up to 3.5 m²/h |
| Resolution | 720 x 720 dpi |
| Media width | Up to 1118 mm (44 inches) |
| Interfaces | Ethernet, USB |
| Connectivity | USB 2.0, Ethernet |
| Power Supply | 220 - 240 V |