Cal.5D88A TECHNICAL GUIDE
ILLUSTRATION AND SPECIAL INSTRUCTIONS ETC.
NO.18
Set the Moon phase corrector
18
Mount the Moon
phase corrector
lever.
Lubricant
Hook the spring
24
Lubricate the points
of engagement of
the 3rd Inter-
mediate wheel for
calendar corrector.
<18>
Lubricate the Moon phase
corrector lever.
◆
Apply the lubricant as shown
Fig. 56 below.
◆
Type of oil: S-6
Mount the Moon phase corrector
lever. Then hook the spring.
◆
<24>
3rd Intermediate wheel for
calendar corrector
Lubricate the contact point
Fig.55
Fig.56
Fig.57
Fig.54
◆
Take care so as not to deform the
spring.
of the spring.
◆
Apply the lubricant as shown Fig.55
below.
◆
Type of oil: AO-3
39/51
inside the Switch spring.
PROCESS
No.
To Next Page
Loading...
