Seiko 7T92 - Standard measurement; Accumulated elapsed time measurement

10
English
Accumulated elapsed time measurement
A
START
A
STOP RESTART
▼
▼
A
STOP RESET
B
▼
A
○○○○
▼
* Restart and stop of the stopwatch can be repeated by pressing button A.
Standard measurement
A A B
▼
▼
START STOP RESET
● After the stopwatch is restarted or split time is released, STOPWATCH 1/20-second
hand moves for about 10 minutes and stops automatically.
● In the same manner, if the stopwatch is stopped and restarted repeatedly or split time
is measured and released repeatedly, STOPWATCH 1/20-second hand moves for
about 10 minutes and stops automatically.
✩ Before using the stopwatch, be sure to check that the crown is set at the normal position and
that the STOPWATCH hands are reset to the “0” position.
* If the STOPWATCH hands do not return to the “0” position when the stopwatch is reset to “0”, follow
the procedure in “SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”.