J
Jill JohnsonAug 21, 2025
Why has my Seiko V194 stopped working?
- SSteven PenaAug 21, 2025
If your Seiko Watch stops operating, it's likely that the energy has been depleted. To resolve this, recharge the watch sufficiently by exposing it to light.
To Next PageTo Next PageWhy has my Seiko V194 stopped working?
If your Seiko Watch stops operating, it's likely that the energy has been depleted. To resolve this, recharge the watch sufficiently by exposing it to light.
Why did my Seiko V194 Watch stop working?
Your Seiko Watch might have stopped operating because the energy has been depleted. To resolve this, recharge the watch sufficiently by exposing it to light.
Why does my Seiko Watch date change during the day?
If the date on your Seiko watch changes during the day, the time is likely set 12 hours ahead of or behind the correct time. To fix this, reset the time correctly, referring to 'TIME SETTING AND HAND POSITION ADJUSTMENT.' (P. 11)
What to do if small second hand moves at two-second intervals on Seiko Watch?
If the small second hand on your Seiko watch moves at two-second intervals, it indicates that the energy is running short. Recharge the watch sufficiently by exposing it to light.
Why is my Seiko Watch second hand moving at two-second intervals?
If the small second hand on your Seiko Watch moves at two-second intervals, it indicates that the energy is running short. Recharge the watch sufficiently by exposing it to light to resolve this issue.
What to do if the date on my Seiko V194 Watch changes during the day?
If the date on your Seiko Watch changes during the day, it means the time is set 12 hours ahead of or behind the correct time. To fix this, reset the time correctly.
What to do if my Seiko V194 Watch second hand moves at two-second intervals?
If the small second hand on your Seiko Watch moves at two-second intervals, it indicates that the energy is running short. Recharge the watch sufficiently by exposing it to light.
Why does the date change during the day on my Seiko V194?
The date on your Seiko Watch might be changing during the day because the time is set 12 hours ahead of or behind the correct time. To fix this, reset the time correctly.
What to do if my Seiko V194 has been charged, but the second hand does not resume one-second interval movement?
If your Seiko Watch has been charged for longer than the time required for full charge, but the second hand does not resume one-second interval movement, it could be due to several reasons: * The light the watch has been exposed to was too weak. * The built-in IC has fallen into an unstable condition. * The watch has been left or worn in extremely high or low temperatures. * The watch has been left close to an object with a strong magnetic field. Correct this condition by moving and keeping the watch away from the magnetic source. Return the watch to a normal temperature so that it works accurately as usual, and then reset the time.
What to do if STOPWATCH hands do not return to the 0 position when the stopwatch is reset on Seiko V194 Watch?
If the STOPWATCH hands do not return to the 0 position when the stopwatch is reset, it may be because the stopwatch hand positions have moved out of correct alignments. Adjust the STOPWATCH hands to the 0 position by following the instructions in 'TIME SETTING AND HAND POSITION ADJUSTMENT.' (P. 11)
General| Brand | Seiko |
|---|---|
| Model | V194 |
| Movement Type | Quartz |
| Caliber | V194 |
| Display | Analog |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Dial Color | Black |
| Glass | Hardlex |
| Crystal | Hardlex |
| Movement | Quartz |
| Water Resistance | 100 meters |
| Features | Date Display |
| Functions | Date |
| Battery Life | 3 years |
Procedure to verify if watch hands are at their preliminary positions.
Steps to adjust the power reserve indicator and stopwatch hands to their correct positions.
Procedure for setting the main time on the watch dial.
Instructions for resetting the stopwatch hands to their zero position.
