Need help?Do you have a question about the Seismic Audio SA-12MT-PW and is the answer not in the manual?
Instructions to reduce the risk of electrical shock by not removing the cover and referring servicing to qualified personnel.
Warning to reduce the risk of fire or electrical shock by not exposing equipment to rain or moisture.
How to daisy chain other powered or active speakers using XLR inputs and outputs.
Troubleshooting why a second SA-MT speaker may not be working with XLR connections.
Explanation of the difference between the gain and volume knobs.
Reason for low volume when plugging a microphone into the input jack.
Confirmation that XLR jacks pass a signal even when the speaker is turned off.
Clarification on whether speakers can be used with an external power amplifier.
Steps to troubleshoot speakers with no output sound or that do not appear to be working.
Guidance on resolving hum or buzz sounds in the SA-MT speakers.
Troubleshooting steps for distorted or fuzzy sound output from the speakers.
General| Model | SA-12MT-PW |
|---|---|
| Configuration | 2-Way |
| Power Handling | 400 Watts RMS, 800 Watts Peak |
| Woofer Size | 12 inches |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 98 dB |
| Impedance | 8 Ohms |
| Enclosure Material | MDF |
| Weight | 35 lbs |
| Inputs | XLR, 1/4" |
| Outputs | XLR |
To Next Page
