32
DISPLAY CONDITIONDISPLAY DESCRIPTION
Output percentage
Elapsed soak time
Temperature unit
Alarm acknowledge 1
Alarm acknowledge 2
Blank
This parameter is read only and
cannot be altered.
Not e: Th is par ameter is
prompted only if Ramp is ON /
Hold. This parameter is read
only and cannot be altered.
Note: This parameter is not
prompted for 0-10 V / 4-20mA.
This parameter is read only and
cannot be altered.
Not e: Th is par ameter is
prompted only if Alarm1 is ON
and Latch is ON.
Not e: Th is par ameter is
prompted only if Alarm2 is ON
and Latch is ON.
/
Programming
To Next Page
Loading...
