TEC Series v 3.2X
Page 10
ACCESSORIES OVERVIEW
Although some options are not shown, available options are:
• External Card reader(s) input (2 or 4 Readers)
• Wiegand, Proximity, RF Transmitter, Barcode (Wiegand output).
• Several reader technologies using Wiegand format signals are available, including Wiegand,
Proximity, RF Transmitter, and Long Range Proximity Readers. Wiegand output keypad
controllers also may be used in some situations. Contact the factory for particulars on Wiegand
output keypads.
• Second signal relay (OPTK2R) has functions for shunt activation and 2 REX inputs.
• Third signal relay (OPTK3R) has functions for CCTV activation, alarm output and 2 tamper inputs.
• Standby batteries (OPTB12V).
• 56k baud modem (OPTKMODEM56).
• RS-232 port or Current Loop for printer, terminal or computer connections (OPTKPRT)
• Serial Baud rates to printer and/or remote terminal (CRT) 300, 600, 1200, 2400, 4800, 9600,
19200
• Current Loop baud rates- 300, 600, 1200, 2400, 4800, 9600
• NIC Card for Networking connections for monitoring and programming
• Multiple units can share same telephone line, via MUIs (OPTKMUI).
• Two minute "sleep" function to allow programming up to 4 TECS with modems.
• Third signal relay (OPTK3R) has functions for CCTV activation, alarm output and 2 tamper inputs.
•
••
• Lighted Hood for greater night time visibility
To NIC2
To Next Page
Loading...