Need help?Do you have a question about the Select Engineered Systems TEC Series and is the answer not in the manual?
Describes TEC 2, TEC 4, TEC 10 models and their display message variations.
Details standard features, customizable options, and memory capacities of TEC units.
Outlines optional features, dynamic scrolling, and fundamental operating principles.
Covers installation environment, power requirements, grounding, and unit specifications.
Provides essential notes and cautions before attempting installation.
Illustrates wiring hookup schematics and terminal barrier strip connections.
Explains relay jumper selections, DIP switch settings, and speaker/mic adjustments.
Identifies the power switch location and power LED indicator.
Lists available optional accessories like card readers, modems, and interfaces.
Details installation of Wiegand modules and card reader voltage selection.
Provides instructions for connecting and grounding card reader wiring.
Explains Wiegand format settings and the function of the Site Code.
Describes the Network Interface Card for TCP/IP connectivity.
Details control for entrances 3 & 4 and the K3 alarm/control relay.
Explains serial port adapter usage for printers and connecting a personal computer.
Covers high-speed modem installation and Multiple Unit Interface (MUI) for shared lines.
A step-by-step guide for basic code entry using the keypad.
Explains how to control TEC functions remotely using a Touch-Tone phone.
Describes initial interaction with the keypad and the main menu options.
Details the manager passcode and provides an overview of programming menus.
Covers managing codes, names, phone numbers, PINs, and card numbers.
Configures entrance settings like unlock time, tones, and system parameters.
Covers terminal type, baud rate, password, and PIN on entrance settings.
Guides on setting time, date, time zones, and holidays for access control.
Explains access control principles, groups, levels, and their configuration.
Details automatic door control and transaction buffer information.
Provides options for clearing buffers, time zones, holidays, and resetting settings.
Covers displaying system parameters, logs, and printing various reports.
Details Federal Communications Commission rules for device connection.
Covers Canadian Department of Communications certification and load number.
Outlines requirements for service, repairs, and warnings about modifications.
General| Brand | Select Engineered Systems |
|---|---|
| Model | TEC Series |
| Category | Intercom System |
| Language | English |
To Next Page