EasyManua.ls Logo

Select Engineered Systems TEC Series - Standard and Customizing Features

Select Engineered Systems TEC Series
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TEC Series v 3.2X
Page 2
1 - 6 digit directory codes field programmable.
0 - 6 digit entry codes Personal Identification Number (PIN) field programmable.
One card per Directory code.
Up to 2,000 cards may be used
Card reader control module for either 2 or 4 entrances using these technologies:
1) Wiegand, swipe, insert, or keypad.
2) Proximity, RF Transmitter, Bar Code (Wiegand code only), Long Range Proximity.
Transaction Buffer (up to 1580 transactions depending on code size and options).
Clock & Calendar, timed lock and unlock.
Time Zones, Access Levels, and Holidays.
Resident activated door/gate release via Touch-Tone™ number (1-9), field programmable on all
entrances.
Voice mail response capability. (Keypad active after unit calls out, programmed from TEC).
Crystal controlled tone detection for short burst 50 MS tone.
Speaker Listen-in.
Memory Capacities:
50/125/250/500/1000/2000 for residents telephone numbers and names in directory.
Dials out either Touch-Tone™ or rotary - field programmable.
Dials up to 14 digit phone numbers.
Unit will mute tones in speaker during dialing.
Unit will not accept Touch-Tone™ signals through the microphone.
Two line 16 character per line LCD display. (TEC 2 Series) Displays one name.
Four line 20 character per line LCD display. (TEC 4 Series) Displays 4 names.
Four line 40 character per line LCD display. (TEC 8 & Advantec Series) Displays 8 names.
Programmable without opening cabinet, via keypad, RS-232, or Modem with Selcom 7 Software
Talk time field programmable from 1 - 99 min.
Postal lock capability included.
Request to exit input for all entrance control relays.
Entry code attempts (strike out) programmable from 0 - 9.
Non-volatile memory, retains data even when power is removed.
Surface or semi-flush mounting.
Remote Entrance relay activation.
Latching Entrance relays (with Remote Control Password).
Programmable background "beep" to indicate call placed from telephone entry unit.
Personal Identification Number (PIN code). Extra PIN codes above unit capacity.
Remote Touch-Tone™ Entrance Relay Control.
Manager Password (First three digits of Program Password).
Battery charging circuitry.
STANDARD FEATURES:
STANDARD CUSTOMIZING FEATURES
1 INTRODUCTION