Install Menu
INSTALL
PROG NO
SKIP
RECEPTION
FINE
AFT
AUTO STORE
02
ADD
CATV-HRC
00
OFF
18
1.PROG. NO.
CH
4. FINE
You can use this FINE tuning process for fine
adjustment by pressing VOL.+/- Buttons between
-50 and +50. Normally fine tuning is only
necessary if reception is poor.
5.AFT (Auto Fine Tuning)
When selecting the AIR,CATV or CATV-STD,
CATR-IRC ,CATV-HRC Signals, there are 01-125
channels available. There are 02 - 69 channels
in the AIR signal.
2.SKIP
You can skip unnecessary program channels of
your choice not to be displayed during viewing
and scanning when pressing the . -/+
buttons.Select "Skip Del" by pressing VOL. + / -
Buttons to select the channel that would like to
skip from the channel scan operation.
3.RECEPTION
You can switch signals: AIR,CATV or CATV-STD,
CATR-IRC ,CATV-HRC.
Select "AFT ON" by pressing VOL. + / - buttons
to Auto Fine Tuning. The FINE tuning function
will be disabled once this AFT is ON
""
""
""
""
""
6.AUTO STORE
Press VOL.+/- Buttons, the TV setwill automaticaly
search from V-L band to U band. The channels are
stored in the order in which they appear in the
frequency bands.
To Next Page
Loading...
General