Selkirk ULTRA-TEMP User Manual

Page 1
ULTRA-TEMP
TM
510000 - 0214
FACTORY-BUILT
INSULATED CHIMNEY
INSTALLATION
INSTRUCTIONS
&
MAINTENANCE GUIDE
(Canada Only)
A MAJOR CAUSE OF CHIMNEY-RELATED FIRES IS
FAILURE TO MAINTAIN REQUIRED CLEARANCES
(AIR SPACES) TO COMBUSTIBLE MATERIALS
MODEL
IT IS OF THE UTMOST IMPORTANCE THAT THIS
CHIMNEY BE INSTALLED ONLY IN ACCORDANCE
WITH THESE INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING YOUR INSTALLATION. FAILURE TO INSTALL
THIS SYSTEM IN ACCORDANCE WITH THESE INSTRUCTIONS WILL VOID THE CONDITIONS OF
CERTIFICATION AND THE MANUFACTURERS WARRANTY. KEEP THESE INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE
TESTED TO
CAN/ULC-S604
LISTED
(5 to 8 inches dia.)

Selkirk ULTRA-TEMP Specifications

General

Brand	Selkirk
Model	ULTRA-TEMP
Category	Ventilation Hood
Language	English

Summary

Model Ultra-Temp Insulated Chimney

Fuels and Appliances

Specifies compatible fuels and residential appliances for the chimney system.

Safety Rules During Installation

Outlines critical safety precautions to follow during the installation process.

General Installation Rules

Provides fundamental guidelines for a correct and safe chimney installation.

Tools Required

Lists essential tools and equipment needed for installing the chimney system.

Chimney Sizing

Explains the importance of correct chimney diameter for appliance performance.

Framing Details

Details on framing openings for chimney supports and clearances.

Ceiling Support Installation

Instructions for installing the ceiling support for the chimney system.

Attic Insulation Shield Installation

Detailed steps for installing the Attic Insulation Shield with framing dimensions.

Firestop Joist Shield Installation

Instructions for installing the Firestop Joist Shield where chimney passes between living spaces.

Elbow Installation

Guidelines for installing 15°, 30°, and 45° elbow kits for offsets.

Adjustable Wall Support Installation

Instructions for installing the adjustable wall support for exterior chimney runs.

Wall Support Assembly and Tee Installation

Securing the wall support, installing the insulated tee and chimney sections.

Wall Band Installation

Guidance on using wall bands for lateral stability on exterior chimney runs.

Cathedral Ceiling Support Installation

Instructions for installing the Cathedral Ceiling Support for specific chimney diameters.

Roof Support Installation

Steps for installing the roof support to hold chimney sections above the roofline.

Roof Flashing Installation

Guidance on selecting and installing roof flashing based on roof pitch.

Universal Roof Brace Kit Installation

Instructions for installing the roof brace kit when chimney extends significantly above the roof.

Spark Arrester Installation

Guidance on when and how to install a spark arrester for safety and bird prevention.

Stove Pipe Adapter

Information on connecting the chimney to low-heat appliances using a stove pipe adapter.

Model UT Anchor Plate

Instructions for using the anchor plate to adapt the chimney to listed fireplaces.

Chimney Operation and Maintenance

Guidance on routine inspection, cleaning, and maintenance for optimal performance.

Chimney Fires and What to Do

Steps to take in case of a chimney fire and post-fire precautions.

Offset Chart Selection

Charts to help select elbow angles and chimney lengths for offsets.

Chimney Height Above Roof Chart

Chart to determine minimum chimney height above the roof based on pitch and distance.

Replacement Parts List

List of available replacement parts for the chimney system with part numbers.

Installation Information Record

Section for recording installation details for future reference and warranty.

Product Registration

Instructions on how to register the chimney product with the manufacturer.