EasyManua.ls Logo

Selmo Synthesis Plus - Page 6

Selmo Synthesis Plus
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Synthesis Plus with "Fil-Pilote" (Class 2) function can be controlled remotely from
a control unit that supports the "Fil-Pilote" system. Brown wire is phase (L), gray wire is
neutral (N) and black wire is used to receive the "Fil-Pilote" signal.
Do not connect the black wire to the ground .
Synthesis Plus without "Fil-Pilote" (Class 1) function, can not be controlled remotely.
The brown wire is the phase (L), the blue wire is the neutral wire (N) and the yellow /
green wire has to be connected to the ground
Connection to the Fil-Pilote system
()Only for product versions equipped with "Fil-Pilote"
1
PHASE NEUTROPHASE NEUTRO
Living room Bathroom Bedroom 1 Bedroom 2
Thermostat
class 2
Thermostat
class 2
Thermostat
class 2
Thermostat
class 1
Switch
Station
Fil-pilote
Switch
Switch
Switch
Thermostat
Thermostat
Thermostat
Thermostat
Example
Fil-pilote
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it
“”Synthesis Plus
cronothermostat for towel rail
EN
Comfort technology division
Selmo
Rev. 01- Sept. 2017