Reverse sewing
Removing the work
Turn the handwheel toward you (counterclockwise) to bring the
thread take up lever to its highest position, raise the presser foot
and remove work behind the needle and presser foot. (2)
Cutting the thread
Pull the threads under and behind the presser foot. Guide the
threads to the side of the face plate and into thread cutter (B).
Pull threads down to cut. (3)
To secure the beginning and the end of a seam, press down the
reverse sewing lever (A). Sew a few reverse stitches. Release
the lever and the machine will sew forward again. (1)
2
A
1
3
B
17
To Next Page
Loading...