To Next Page
T
Todd LyonsJul 30, 2025
What to do if Sena LinkIn Ride Pal III try intercom reconnection?
- MMichael LambJul 30, 2025
If you do not want to reconnect, tap the Center Button to stop the attempt.
What to do if Sena LinkIn Ride Pal III try intercom reconnection?
If you do not want to reconnect, tap the Center Button to stop the attempt.
Details the function and operation of the headset's buttons.
Instructions on how to turn the headset on and off.
Explains how to charge the headset and charging indicators.
Describes how to check the battery level via LED indicators and voice prompts.
How to adjust the volume for different audio sources.
Information about the software for firmware upgrades and configuration.
Steps to pair the headset with a mobile phone or Bluetooth stereo device.
How to pair a second mobile phone, GPS, or SR10 device.
Pairing selectively for A2DP stereo music or HFP for phone calls.
Instructions for pairing headsets for intercom conversations.
How to make and answer mobile phone calls.
How to use the voice speed dial menu for quick calls.
How to listen to GPS instructions wirelessly.
Using the headset with a Sena SR10 for two-way radio communication.
Pairing with Bluetooth audio devices for stereo music playback.
How to share music with an intercom friend.
Steps to initiate an intercom conversation with friends.
How to terminate an intercom conversation.
Managing intercom and mobile phone calls simultaneously.
Pairing the headset with non-Sena Bluetooth headsets.
Initiating universal intercom with non-Sena headsets.
Configuration for mobile phone pairing using voice prompts.
Configuration for multipoint phone pairing using voice prompts.
Configuration for selective phone pairing using voice prompts.
Configuration for selective media pairing using voice prompts.
Steps to assign phone numbers to speed dial.
How to enable or disable voice prompts for settings.
How to enable or disable the sidetone feature.
How to enable or disable advanced noise control.
How to remove all saved Bluetooth pairing data.
Instructions to restore the headset to factory default settings.
How to exit the voice configuration menu and return to standby.
Explains what to do if an intercom conversation fails to start.
Details how the headset attempts to reconnect intercoms.
How to perform a hard reset using the pin-hole button.
Refers to section 8.10 for factory reset instructions.
Details compliance with FCC rules regarding interference.
Information on FCC limits for RF exposure.
Warning about modifications not approved by the party responsible for compliance.
Declaration of product conformity with R&TTE Directive for EU.
Compliance statement for Industry Canada license-exempt RSS standards.
Information regarding Bluetooth word mark and logo ownership.
Instructions for proper disposal of electronic waste.
Guidelines for storing and managing the product.
Specific instructions and warnings for using the product.
Information and precautions regarding the rechargeable battery.
Details the warranty coverage and limitations for the product.
Legal terms and conditions for using the product.
Reasons for limited liabilities and warranty exclusions.
Legal limits of LRP's liability for product issues.
How to obtain product warranty service and support.
General
