Sena RC3 User Manual

32
Installation
There are three ways of installing the RC3.
1 2
Using the Clip
Using the Hook and Loop Fasteners
Using the Adhesive Tape
1
Hook Fastener
2
Loop Fastener
RC3
Quick Start Guide
Getting Started
Center Button
Battery Release Hole
Battery Slot
(-) Button(+) Button
Note:
•
When closing the battery slot, insert both ends of
the rubber rst.
•
To remove the battery, insert a paper clip through
the Battery Release Hole.
16.Aug
1

Sena RC3 Specifications

General

Brand	Sena
Model	RC3
Category	Receiver
Language	English

Summary

Installation Methods

Using the Clip

Describes how to install the RC3 using the clip fastener.

Using Hook and Loop Fasteners

Details the installation process using hook and loop fasteners.

Using Adhesive Tape

Explains how to attach the RC3 using adhesive tape.

Getting Started with Battery

Battery Slot and Release Hole

Instructions for using the battery slot and release hole for battery management.

Button Operations

Power On/Off and Deep Sleep

How to turn the device on/off and enter deep sleep mode using buttons.

Button Action Types

Details on button actions like tap, double tap, and press.

Device Status and Connectivity

Battery Check and Bluetooth Pairing

Checking battery status via LED and pairing the headset with devices.

Factory Reset and Headset Control

Instructions for factory reset and controlling headset functions.