Sena SMH3 - Reset to Factory Default Setting; Exit Voice Configuration Menu

SMH3
19
English
Reset to Factory Default Setting
Voice Prompt “Factory reset”
Factory Default
N/A
Execute
Press the (-) Button
To restore factory default settings on the SMH3, press and hold the
(+) Button until you hear a voice prompt, “Factory reset”. Press the (-)
Button to confirm. The SMH3 powers off with a voice prompt, “Headset
reset, goodbye”.
([LW9RLFH&RQÀJXUDWLRQ0HQX
Voice Prompt ő'ZKVEQPſIWTCVKQPŒ
Factory Default
N/A
Execute
Press the (-) Button
To exit voice configuration menu and get back to stand-by mode,
press and hold the (+) Button until you hear a voice prompt, “Exit
EQPſIWTCVKQP”. Press the (-) Button to confirm.
Press (+) Button Press (-) Button
“Vox phone”
Enable / disable
“Voice prompt”
Enable / disable
“Delete all pairings”
Execute
“Factory reset”
Execute
ő'ZKVEQPſIWTCVKQPŒ
Execute
8QKEG%QPſIWTCVKQP/GPW$WVVQP1RGTCVKQPU