Sena Snowtalk 2 - PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES

QUICK START GUIDE
Phone Pairing
There are three ways to pair the phone.
Initially Pairing the Headset
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset
=
1s
HOLD
=
Select Snowtalk 2
Device A
Device B
......
Sena Snowtalk 2 v1.0
Bluetooth
l
l
LED
STATUS
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel pairing, tap the (R) Button.