What to do if Senco Blood Pressure Monitor measurement failed?
If your Senco Blood Pressure Monitor isn't displaying a value, or the values seem wrong, make sure to keep your arm and body still during the measurement. Also, avoid talking while the device is measuring your blood pressure.
Why does Senco Blood Pressure Monitor show different readings than at the doctor?
If your Senco Blood Pressure Monitor shows a higher blood pressure value at home compared to the doctor's office, check the cuff's fitting and location on your arm. Also, make sure you are sitting correctly, referring to the instructions in the user's manual for correct seating recommendations.
What to do if air is leaking out of Senco Blood Pressure Monitor cuff?
If you notice air leaking from the cuff of your Senco Blood Pressure Monitor, first check the fitting and location of the cuff on your arm to ensure it's not too tight or incorrectly positioned. If the cuff is torn or damaged, contact the vendor to request a replacement.
Why is my Senco Blood Pressure Monitor not pressurizing?
If your Senco Blood Pressure Monitor isn't pressurizing, check the cuff for any damage. If the cuff is damaged, contact the vendor to request a new one.
General| Brand | Senco |
|---|---|
| Model | SBD 0900WH |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page