Sencor ELEMENT P006S - 7 Care and Maintenance; Battery Care

Care and maintenance
EN
Care and maintenance
32 EN
Copyright © 2016, Fast ČR, a. s. Revision 04/2017
7. Care and maintenance
Battery care
The device is powered by abattery. It is necessary to charge the battery
when it is empty. You can achieve a maximum performance of a new
battery only by charging it when it is fully discharged. If you do not use
the charger, unplug it from the power outlet and from the device. Do not
leave afully charged battery charge for longer than is strictly necessary.
Overcharging may shorten its life. Temperature affects the level to which
the battery can be recharged. Therefore, it is necessary to keep the battery
at room temperature before charging. If the temperature of the battery
exceeds 40 °C, it is not possible to charge it.
Use the battery only for its intended purpose and prevent short-circuiting.
Accidental short-circuiting can occur when ametallic object causes direct
connection of the positive (+) and negative (-) battery terminal. Do not use
damaged battery. Do not leave the battery in hot or cold places. It reduces
its capacity and life. Adevice with ahot or cold battery may not work
temporarily, even when the battery is fully charged.
Do not throw batteries into afire, they could explode. Dispose of them in
accordance with local regulations.
Product care and maintenance
The following recommendations will help to extend the life of your phone.
Keep the device and accessories out of the reach of small children. Keep
the device dry. All types of liquids or moisture will cause disruption of
electronic circuits. Do not store the device in hot places. High temperatures
can shorten the life of electronic devices and warp or melt certain plastics.
Do not attempt to open the device in other ways than as described in this
manual. Improper handling can damage the device. When cleaning the unit,
do not use harsh chemicals or strong detergents.
Element P006S EN CZ SK HU PL.indb 32 24.04.2017 23:41:21