EN - 4
RC SIGNAL
RC signal searching condition:
The clock will start search the signal automatically when powering
on or resetting. Press ‘WAVE’ button to stop the RC signal searching.
Under normal time displaying mode, press ‘WAVE’ button to enter into
RC signal searching.
RC signal searching will start everyday automatically.
Automatically searching radio signal to adjust time: 1:00 am, 2:00 am,
3:00 am, 4:00 am, and 5:00 am.
If the signal is received successfully once a day, the remaining radio
signals on that day will be ignored.
The process will be repeated every day. RC time searching will last
7 minutes.
RCC Receiving Icon:
When signal received, RC icon willbeashingby“1HZ”;
When signal is weak and adjust the right signal, icon of
willbeashingby“1HZ”aswell;
When signal successfully received, LCD will display completed RC icon
, and exist RC searching.
To Next Page
Loading...