Need help?Do you have a question about the Sencor SHI 4400GD and is the answer not in the manual?
General precautions for safe use, including supervision, children's play, cleaning, and power cord safety.
Precautions related to power connection, grounding, and handling the power cord.
Guidelines for safe operation, including placement, environment, and avoiding misuse.
Details on appliance components, intended use, and features like temperature lock and auto shut-off.
Step-by-step guide for powering on, adjusting temperature, and using the temperature lock function.
Explanation of the automatic shut-off feature and its intended use.
Instructions on preparing hair, straightening technique, and safe handling during use.
Procedure for safely powering down the appliance after use.
Instructions for cleaning the appliance's exterior and plates safely.
Recommendations for storing the appliance when not in use.
Details on voltage, frequency, power, temperature range, and protection class.
Information on how to properly dispose of packaging and the electronic appliance.
This document provides instructions for the SENCOR SHI 4400GD hair straightening iron, covering its function, usage, and maintenance.
The SENCOR SHI 4400GD is a hair straightening iron designed for personal use in households, offices, and similar environments. Its primary function is to straighten hair using heated plates. The device features titanium-enhanced plates for efficient heat transfer and durability. It offers adjustable temperature settings, allowing users to select the optimal heat level for different hair types, from fine to thick. The iron is equipped with an LED display to show the current temperature and an automatic shut-off function for safety.
General Use and Safety: Before connecting the appliance, ensure the voltage matches your power socket. Always connect to a properly grounded socket and avoid using extension cords. Do not pull on the power cord to disconnect the appliance; always pull the plug. Keep the power cord away from sharp objects, hot surfaces, and ensure it does not hang over table edges. Never use the appliance with wet hands or feet, and do not submerge it in water or any other liquid. If the power cord is damaged, have it repaired by a professional service center. Do not attempt to repair the appliance yourself, as this may void the warranty and pose a safety risk.
When using the appliance in the bathroom, always unplug it from the socket after use, as the proximity of water presents a danger even when the appliance is turned off. For added safety in bathrooms, it is recommended to install a Residual Current Device (RCD) with a maximum current rating of 30 mA in the electrical circuit. Do not use the appliance near baths, showers, washbasins, or other containers filled with water.
Preparing for Use: Unpack the appliance and remove all packaging materials. Keep the original cardboard box and packaging for potential future transport. Before first use, wipe the plates with a slightly damp cloth and then dry them.
Hair Preparation: Ensure your hair is clean, dry, and free of tangles. The appliance is designed for use on natural hair only; do not use it on wigs, hairpieces, or synthetic hair.
Operating the Appliance:
Temperature Lock Function: The appliance features a temperature lock function. To activate it, press and hold the power button (A1) for longer than 3 seconds while the appliance is heating or operating. The display will show "LOC", and the temperature setting will be locked, preventing accidental changes. To unlock, press and hold the power button (A1) again for longer than 3 seconds. The display will show "UNL".
Automatic Shut-Off Function: For safety, the appliance will automatically turn off if no button is pressed for 30 minutes. To turn it back on, press the power button (A1) for 3 seconds. This function is intended for safety and should not replace manually turning off the iron.
Temperature Guidelines:
These are general guidelines; the optimal temperature may vary depending on hair type and condition.
Cleaning and Storage: Always turn off the appliance and disconnect it from the power socket before cleaning or moving it. Ensure the appliance has fully cooled down before cleaning or storing. Never immerse the appliance in water or wash it under running water. No part of this appliance is designed to be washed in a dishwasher.
To clean the outer parts of the appliance and the straightening plates, use a clean cloth dampened in lukewarm water. Do not use aggressive cleaning agents, paint thinners, or solvents, as these can damage the surface of the product. Regularly clean dust, fats, and hairdressing agents (e.g., gels, mousse, sprays) from the plates after each use to maintain performance and extend the lifetime of the plates.
Store the appliance in a safe, dry, clean place, out of reach of children.
General| Plate Material | Ceramic |
|---|---|
| Auto Shut-off | Yes |
| Type | Hair Straightener |
| Display | No |
| Heat up time | 30 seconds |
| Ionizing | Yes |
| Floating plates | Yes |
| Voltage | 100-240 V |
| Frequency | 50/60 Hz |
| Color | Gold |
| Cord Length | 1.8m |
| Material | Plastic |
To Next Page