Sencor SHX 55 - Assembling the Product; Product Operation

Rotary Patio Brush
SHX 55
ASSEMBLING THE PRODUCT
1) Attach the adapter insert on to the rotary brush end so that both protrusions on the rotary brush
end enter the appropriate openings in the adapter insert.
2) Then gently push the adapter insert and turn it by 90° clockwise so that it locks into place.
Note:
The adapter insert needs to be inserted all the way in before being locked in, otherwise it is not
possible
to turn and lock in place.
3) Screw the supplied pole attachment on to the tread of the adapter insert.
Now attach the pistol of the high pressure cleaner (not included with this product):
1) Insert the pole attachment into the pistol so that the lugs fit inside the openings inside the pistol.
2) No gently press the working attachment into the pistol and turn it 90°.
3) The working attachment will be arrested in the pistol.
PRODUCT OPERATION
The rotary patio brush can be used to clean both with clean water and with a shampoo solution. If the
shampoo solution is necessary proceed as follows:
1 Open the tank cover and pour in max. 750 ml of a shampoo solution.
2) Using the adjustment screw set the desired shampooing intensity - screwing in will reduce the
intensity, screwing out will increase the intensity.
3) The brush is now ready for use (continue by following the user's manual of the high pressure
cleaner).
A Caution
Use only cleaning agents intended for use in high pressure cleaners. Never use liquids
containing organic solvents, acids, flammable compounds, colourings, oils and compounds
whose fumes are flammable, explosive or toxic.
CZ-5
Copyright © 2011, Fast CR, a.s. Revision 03/2011