Sencor SLE 1955M4 - Page 29

Basic controls
Note:
Renewing factory settings will delete all channels and the password.
5.8. LOCK menu (Lock)
The sixth item on the menu is LOCK (Lock). For first entry, use the factory password of
6666. Here you can lock the system, set the password, block a program or set a parental
lock. As soon as the sustem locks (the lock is activated), it is no longer possible to search
for any channels or programs.
A
Lock System
Set Password
<= Block Program
< LOCK O Parental Guidance Off >
v
#ononka
Note:
The default password is 6666. If you forget this password, you can use the emergency
password: 9527.
Channel Locks: Use the A/F buttons to select a channel that you wish to block and
press the green button to block it. If you want to unblock a program, enter the main
menu, enter the password and then press the green button again.
Parental control: Use the A/F buttons to set the rating, under which it will be possible
to watch certain inappropriate programs without knowing the password. The age limit
is specified by the broadcaster of the given program. The majority of programs do not
contain information about the limit and the parental control settings will therefore not
prevent them from being watched.
5.9. EPG menu (Electronic Program Guide)
The EPG serves to display information about the broadcast programs on television
channels and radio stations. To enter the EPG menu press the EPG button.
PROGRAMME GUIDE TIME
28 Apr 04:39
= 800 SZTVM01 No Information
801 SZTVM02 No Information
802 SZTVM03 No Information
803 SZTVMO4 No Information
804 Date No Information
@INFO @Schedule @ Remind
(0)
OK
@
INDEX
EN 27
Copyright © 2014, Fast CR, a. s. Revision 04/2014