Sencor SMR 113 - Call Tones; Backlit Display

EN-6 EN-7
 
A call tone alerts others that you want to start talking.
  
The device has 10 call tones.
Press the MENU button four times, “CA” is displayed and the current
call tone is ashing.
Press the UP▲ or the Down▼ button to change another Call Tone.
Press the Call/PTT button to conrm and return to stand-by mode.
  
Press the Call/PTT button briey, the call tone will be transmitted on
the set channel.
 󰀨
When a button is pressed, the unit will beep briey.
To set the key-tone.
Press the MENU-button ve times “to” will be displayed.
Press the UP▲ button to turn on or the Down▼ button to turn o󰀨 (OF)
the button tones.
Press the Call/PTT – button to conrm your selection and return to the
standby mode.
 󰀨
After the PTT button us released, the device will send out a roger beep
to conrm that you have stopped talking.
To set the Roger Beep.
Press the MENU button six times, “ro” will be displayed.
Press the UP▲button to turn on or the Down▼ button to turn o󰀨 the
Roger Beep function.
Press the Call/PTT button to conrm your selection and return to the
stand-by mode.
 
To activate the LCD display backlight, press any button with the
exception of the Call/PTT button and the ashlight button. The LCD
backlight will light upfor 5 seconds.