Sencor SPT 300 - Page 8

Skip track
During playback, press the forward or backward SKIP buttons to skip to the next or previous track/file.
High-speed music search
During playback, press and hold the forward or backward SKIP buttons to skip/search through
the current track/file at high speed in forward or backward directions. When the SKIP buttons are
released, normal playback speed will be resumed immediately.
10+/folder+ control
Press and hold the 10+/FOLDER+ button to advance the music search by increment of 10 tracks.
Press the 10+/FOLDER+ button once to advance to the next folder on the USB flash-drive.
Repeat playback modes (Repeat 1/Repeat all/Repeat Folder)
Repeat the Current Track
During playback, press the PROGRAM/REPEAT button until the ay icon is displayed to select the
current track/file to be repeated. The selected track/file will be repeated continuously.
Repeat Folder
During playback, press the PROGRAM/REPEAT button until ay icon and “FOLDER” icon are
shown on the display. All tracks/files inside the desired folder will be repeated continuously.
Repeat АП Tracks
During playback, press the PROGRAM/REPEAT button until the O icon is displayed. All tracks/
files on the USB flash-drive will be repeated continuously.
Return to normal playback
Press the PROGRAM/REPEAT button until NO repeat indicator is displayed. The normal playback
will be resumed.
Programmed USB playback
This unit can be programmed to play up to 20 tracks/files in USB mode. Plugged in the flash-drive
(without pressing the “PLAY/PAUSE” button)
1. Press PROGRAM/REPEAT button once in the stop mode. “P01” will be shown on the display
and blinking.
2. Press the 10+/FOLDER+ button to select the desired folder first.
3. Press the SKIP buttons to select the desired track to be programmed.
4. Press PROGRAM/REPEAT button again to save the selected track/files.
5. Repeat steps 2-4 to program up to 20 tracks/files.
6. Press the PLAY/PAUSE button to play the programmed tracks after programming is completed.
The “PROG” icon will be displayed during the programmed playback.
7. To clear program and resume normal playback, press the STOP button twice during playback, or
open the CD door, or change to RADIO mode to clear the programmed tracks/files.
Remark:
The unit can store up to 20 tracks/files in the programmable memories. During the programmed
playback, user can still select the “repeat 1/repeat all” functions.
EN - 7