Features of the WanderGuard
®
Universal Tester
The Universal Tester is a hand-held, battery-powered device used to test
WanderGuard door monitors and WanderGuard bracelets.
When using the tester to test bracelets, the tester will detect if a bracelet
is working properly, the individual ID number of the resident wearing
the bracelet and when the bracelet is reaching its “replace bracelet”
date.
The Universal Tester will indicate when it’s battery life is low. When
the battery power is low, “LO” will flash three times whenever a button
is pressed. When this happens, the Universal Tester needs to be replaced
immediately. The tester is guaranteed to operate for at least one year*. A
dimming display is also an indication that the battery is low and the
tester needs to be replaced.
The Universal Tester has an ambient light sensor built-in. When the
tester is used in low light conditions, it will automatically back-light the
LCD display.
Using the RECALL button will display the result of the last bracelet
test.
3
DOOR
TEST
BRACELET
TEST
RECALL
AMBIENT LIGHT
SENSOR
* Based on testing 30 bracelets and 10 doors per day.
To Next Page