4 WWW.SENIXTOOLS.COM
MAINTENANCE
MAINTENANCE
If you need to repair or replace the battery or charger,
contact Senix customer service at 1-800-261-3981.
CHARGER
• Keep the charger clean and clear of debris. Do not allow
foreign material to get into the recessed cavity or onto
the contacts. Wipe the charger clean with a dry cloth. Do
not use solvents or water, and do not place the charger
in wet conditions.
• Unplug the charger when there is no battery in it.
• Fully charge the battery before placing it in storage.
• Store the charger at normal room temperature. Do not
store it in excessive heat. Do not use the charger in
direct sunlight or in damp conditions. Do not charge
outside. Recharge at room temperature. If the battery is
hot, allow it to cool down before recharging.
BATTERY
• Make sure the battery is fully charged before storage in
order to maximize the life of the battery.
WARNING — Shorting the battery terminals together
may cause burns or a re.
• When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another.
• Do not store the battery pack on the tool.
• After charging, the battery pack may be stored in the
charger, as long as the charger is not plugged in.
CAUTION!
FLAMABLE
IF DAMAGED
FRAGILE
LITHIUM BATTERY
DO NOT LOAD OR TRANSPORT
PACKAGE IF DAMAGED
For more information, call 1-800-261-3981.
This shipment contains lithium ion batteries:
• Please handle with care. Fragile contents. Keep dry.
• A ammable hazard exits if this package becomes
damaged.
• Special procedures must be followed in the event this
package becomes damaged. Call the number below for
a Safety Data Sheet.
For more information call 800-261-3981.
To Next Page
Loading...