Operation and Calibraion
The operation of BMC-2000 is according to the below sequence.
Start – up
To install the 2 AA batteries, first open the battery cover by sliding it, clipping the battery
in place and closing the battery cover. Insert the mouthpiece adapter into the BMC-2000
and then connect a disposable mouthpiece to the mouthpiece adapter.
Press and hold the button until buzzer & LED become active.
LCD become active and displays it for 1 second
Display for 3 seconds
Main Mode
Arrow move: The arrow is moved up or down by pushing “UP” or “DOWN” button. The
arrow flickers per second.
Breath CO test
Enter Breath CO test mode then start Breath CO test
While a bar fills up black for 15 seconds, hold breath
To Next Page
Loading...