Need help?Do you have a question about the Sennheiser E W 300 IEM G2 and is the answer not in the manual?
General| Modulation | FM |
|---|---|
| Total Harmonic Distortion | < 0.9 % |
| RF Output Power | 10/30 mW |
| Power Supply | Battery or external power supply |
| Input Connector | XLR-3 |
| Battery Life | 8 hours |
Explains the nine channel banks and 12 switchable channels per bank, including factory-preset and selectable frequencies.
Details the front panel controls and graphic display of the SR 350 IEM G2 twin transmitter.
Illustrates and labels the rear panel connectors and switches for the SR 350 IEM G2 twin transmitter.
Details the rear panel connectors and controls for the SR 300 IEM G2 stereo transmitter.
Identifies the operating controls on the EK 300 IEM G2 stereo receiver.
Describes modulation display, PEAK warning, and button backlighting on the transmitter.
Explains operation/battery status, RF signal indication, and display backlighting on the receiver.
Details precautions and procedures for mounting transmitters in a 19" rack assembly.
Procedure for mounting the SR 350 IEM G2 twin transmitter into a 19" rack.
Instructions for mounting SR 300 IEM G2 transmitters into a 19" rack using the GA 2 adapter.
Explains how to switch between 15 mW and 100 mW transmission power.
Instructions for connecting the transmitter to the power supply and disconnecting it.
Procedure for powering the transmitter on and off via the ON button.
Procedure for powering the receiver on and off using the volume control.
How to adjust headphone volume on both the transmitter and receiver.
Describes the function of buttons in standard display, operating menu, and setting modes.
Lists all available menu functions for both transmitter and receiver with brief descriptions.
Steps to access the operating menu and select functions using SET and rocker buttons.
Adjusting transmitter sensitivity and selecting standard display modes.
Navigating channel banks, setting frequencies, and scanning for free channels.
Setting the receiver's squelch threshold to minimize noise.
Guidelines for operating multiple transmission links simultaneously.
Detailed steps for adjusting the receiver's squelch threshold to minimize noise.
To Next Page