Sennheiser SKP 100 G3

Need help?

Do you have a question about the Sennheiser SKP 100 G3 and is the answer not in the manual?

Summary

Important Safety Instructions

Putting the Plug-on Transmitter into Operation

Inserting the Batteries;Accupack

Charging the Accupack

Plugging the Plug-on Transmitter onto a Microphone

Using the Plug-on Transmitter

Switching the Plug-on Transmitter On;Off

How to power the transmitter on and off, including RF mute options.

Deactivating the Lock Mode Temporarily

Procedure to temporarily disable the automatic lock mode for operation.

Muting the Audio Signal or Deactivating the RF Signal

How to use the MUTE switch to control audio or RF signal transmission.

Using the Operating Menu

Working with the Operating Menu

Adjusting Settings via the Operating Menu

Adjusting the Input Sensitivity - Sensitivity

How to set the audio input level for optimal signal quality.

Setting the Mode for the MUTE Switch - Mute Mode

Configuring the MUTE switch for audio muting or RF signal deactivation.

Selecting the Frequency Bank and Channel Manually - Frequency Preset

Manually choosing the transmission frequency bank and channel.

Activating;Deactivating Pilot Tone Transmission - Pilot Tone

Enabling or disabling the pilot tone for receiver squelch control.

Activating;Deactivating the Automatic Lock Mode - Auto Lock

Resetting Settings in the Operating Menu - Reset

The Extended Menu Advanced Menu

Setting Transmission Frequencies and Frequency Bank U - Tune

Procedure to set transmission frequencies for the user-assignable frequency bank.

Synchronizing the Plug-on Transmitter with a Receiver

Synchronizing with the Receiver - Individual Operation

Steps for syncing a single transmitter with a receiver.

Synchronizing Plug-on Transmitters with Receivers - Multi-channel Operation

Recommendations and Tips

For the Plug-on Transmitter

For Optimum Reception

If a Problem Occurs