Sennheiser SK 100 G3 User Manual (English)

Other manuals for Sennheiser SK 100 G3

Questions and Answers:

E
Edgar ClarkJul 26, 2025
What to do if Sennheiser Transmitter has RF signal but no audio, and “MUTE” appears?
- B
  brookssylviaJul 26, 2025
  If the Sennheiser Transmitter shows “MUTE” and you have RF signal but no audio, it could be that the bodypack transmitter is muted. In this case, cancel the muting. Alternatively, the receiver’s squelch threshold might be too high; try reducing that setting. It is also possible that the bodypack transmitter isn’t sending a pilot tone. To resolve this, activate or deactivate the pilot tone transmission.
J
Jeff ButlerAug 2, 2025
Why is there no RF signal at the Sennheiser SK 100 G3 receiver?
- A
  Ann JohnsonAug 2, 2025
  If you are experiencing no RF signal at the receiver with your Sennheiser Transmitter, it could be due to several reasons. First, ensure that the bodypack transmitter and receiver are set to the same channel. If they are, try synchronizing the bodypack transmitter with the receiver. Also, the transmission range could be exceeded, so reduce the distance between the bodypack transmitter and receiving antennas. Finally, check if the RF signal is deactivated (“RF Mute“); if so, activate the RF signal.
G
Gary DominguezAug 9, 2025
How to fix Sennheiser SK 100 G3 Transmitter audio signal with high background noise?
- R
  Ryan HallAug 10, 2025
  If the audio signal from your Sennheiser Transmitter has a high level of background noise or is distorted, it might be because the bodypack transmitter’s sensitivity is adjusted too low or too high. To fix this, adjust the input sensitivity.
V
victoriaramirezAug 18, 2025
What to do if Sennheiser SK 100 G3 Transmitter has no operation indication?
- W
  william44Aug 18, 2025
  If there is no operation indication on your Sennheiser Transmitter, the batteries are likely flat or the accupack is flat. Replace the batteries or recharge the accupack to resolve this issue.

Sennheiser SK 100 G3 Specifications

General

Product color	Black
Handheld remote control	No
Connectivity technology	Wired & Wireless
Headphone outputs	1
Headphone connectivity	3.5 mm
Digital audio optical out	0
Battery type	AA
Dimensions (WxDxH)	82 x 64 x 25 mm
Frequency range	80 - 18000 Hz
Signal-to-Noise Ratio (SNR)	110 dB
FM band range	516 - 865 MHz
Digital audio coaxial in	-
Manual	Yes