Need help?Do you have a question about the Sennheiser SK 5212-II and is the answer not in the manual?
General| Input Connector | 3-pin Lemo |
|---|---|
| Frequency Stability | ± 10 ppm |
| Modulation | FM |
| Dynamic Range | > 110 dB (A) |
| Signal-to-Noise Ratio | > 110 dB (A) |
| Spurious Emissions | <-60 dB |
| Power Supply | 2 x AA batteries |
| Battery Life | Up to 8 hours |
Guides on inserting and replacing the transmitter's battery.
Instructions for connecting a microphone to the transmitter.
Instructions on how to connect the antenna to the transmitter.
Procedure for powering the transmitter on and off.
Explanation of the autolock function and its activation.
Explanation of the function of each button on the transmitter.
Guide on switching between channels in FIX and VAR frequency banks.
How to select and store transmission frequencies in the VAR bank.
Guide on adjusting the audio input sensitivity for optimal signal capture.
Restoring the device to its original factory settings.
Activating or deactivating the autolock function.
To Next Page
