Sennheiser SKP 100 User Manual

Instruction Manual
SKP 100
C
M
Y
CM
MY
CY
CMY
K

Sennheiser SKP 100 Specifications

General

Type	Plug-on transmitter
Battery Life	Up to 8 hours
Modulation	FM
RF Output Power	30 mW
Power Supply	2 AA batteries
Operating Range	Up to 100 m (depending on environment)
Audio Input	XLR-3

Summary

Important safety instructions

Product overview

Putting the plug-on transmitter into operation

Inserting and charging power sources

Instructions for inserting batteries/accupack and charging the accupack.

Connecting to a microphone

Using the plug-on transmitter

Powering on/off and RF signal control

Procedure for switching the transmitter on, off, and disabling RF signal.

Lock mode and display selection

Audio muting and RF signal management

Using the MUTE switch for audio muting or RF signal deactivation.

Using the operating menu

Basic menu operation and settings adjustment

Guides on selecting items, changing settings, canceling entries, and exiting menus.

Input sensitivity and frequency setup

Instructions for adjusting audio input sensitivity and setting frequency banks/channels.

Name, lock mode, and advanced tuning

Covers setting transmitter names, managing lock mode, and initial frequency tuning.

Mute mode and pilot tone configuration

Synchronizing the plug-on transmitter with a receiver

Synchronizing for individual operation

Synchronizing for multi-channel operation

If a problem occurs

Specifications