Need help?Do you have a question about the Sennheiser ew 300 IEM and is the answer not in the manual?
General| THD, total harmonic distortion | < 0.9 % |
|---|---|
| Modulation | Wideband FM |
| RF Output Power | 30 mW / 10 mW |
| Max. Operating Distance | 100 m |
| Power Supply | 2 x AA batteries or DC power supply |
| Operating Temperature | -10 °C to +55 °C |
Details setup steps and component identification for the SR 300 IEM stereo transmitter.
Instructions for attaching the self-adhesive rubber feet to the transmitter for stability.
Guidance on connecting the telescopic or remote antenna to the transmitter.
Steps for connecting the power supply cable to the transmitter's DC socket.
How to connect audio sources to the transmitter's input sockets.
Procedure for powering the SR 300 IEM transmitter on and off using the power button.
Instructions for connecting headphones to the transmitter for audio monitoring.
Important advice on protecting hearing by avoiding excessively high headphone volumes.
Step-by-step guide for replacing the battery in the EK 300 IEM receiver.
Instructions for attaching the antenna to the EK 300 IEM receiver.
How to connect headphones to the EK 300 IEM receiver's headphone output.
Explanation of the LED indicators for RF signal reception and battery status on the receiver.
Overview of the main operating buttons and their functions for the system.
Description of the LC display panels on the transmitter and receiver and their segments.
Explanation of how to navigate and use the device's operating menu system.
How to switch between factory-preset frequencies or channel presets.
How to adjust the input sensitivity of the transmitter in 5-dB steps from 0 to -15 dB.
Setting the receiver's squelch threshold to eliminate noise when the transmitter is off.
How to switch the transmitter between stereo and mono audio output modes.
Switching the receiver between standard stereo and FOCUS operation modes.
Activating the switchable limiter to reduce headphone output volume by approximately 18 dB.
Choosing what information (frequency, channel, or name) is shown on the transmitter's standard display.
Adjusting the transmitter and receiver frequencies in 25-kHz steps.
Naming the SR 300 IEM transmitter with up to six characters for identification.
Locking controls to prevent accidental adjustments or switching off the device.
Guidance on maximizing transmission range and minimizing interference for optimal signal reception.
Tips for using multiple systems simultaneously, including frequency planning and antenna spacing.
General introduction to Sennheiser's evolution wireless UHF transmission systems.
Details on RF and AF characteristics, plus overall device specifications for the evolution wireless system.
Technical details for the EK 300 IEM receiver, covering RF, AF, and overall device parameters.
Technical details for the SR 300 IEM transmitter, covering RF, AF, and overall device parameters.
Instructions for setting the transmitter to licence-free frequencies for operation within the UK.
Information on obtaining frequency allocations and licensing for UK operation.
Details on available shared frequencies in TV channel 69 and recommended frequency sets.
To Next Page
