Putting the HDV 820 into operation
18 | HDV 820
Connecting the headphone amplifier to
the power supply system
▷ Connect a suitable power cable (supplied) to the IEC mains
socket and a wall socket.
To completely disconnect the headphone amplifier from the power
supply system:
▷ Unplug the power supply unit from the wall socket.
CAUTION
Danger of damage to the product!
If you connect to an unsuitable power supply, the product can be
damaged.
▷ Use a suitable power cable (supplied) to connect the product to
the power supply system (100 to 240 V AC, 50 or 60 Hz).
ANALOG OUT
~100-240 VAC 50/60Hz
LR
BAL
To Next Page
Loading...
