Need help?Do you have a question about the Sennheiser HMD 26 and is the answer not in the manual?
General| Microphone Type | Electret condenser |
|---|---|
| Connector | 3.5 mm / 6.3 mm |
| Ear Coupling | Circumaural |
| Impedance | 150 Ω |
| Type | Closed, dynamic |
Connecting to audio systems and using ActiveGard to prevent hearing damage from high volumes.
How to switch the ActiveGard hearing protection feature on or off.
Operating the NoiseGard switch and interpreting the LED indicator for noise compensation.
Detailed mapping of wires to functions for the headset's main connector.
Color-to-function mapping for the Cable -6 used with HMD/HME models.
Color-to-function mapping for the Cable -7 (steel wire) used with HMD/HME.
Color-to-function mapping for the Cable -H-6 used with HMD/HME models.
Pin configuration for the -X4F and -H-X4F cables with their connectors.
Pin configuration for the -X5 and -H-X5 cables with their connectors.
To Next Page
