Sennheiser PX 100 User Manual

Cat. No. 005206
PX 100
Headphones | Streetwear Headphones
General Description
The PX 100 is a pair of open, dynamic supra-aural mini headphones for
mobile players. Their outstanding sound reproduction and foldable design
make them ideal for outdoor use and travelling.
Features
j
Fold and flip: registered design allows the ear cups to be turned
through 90° and fold the headphones closed (headphones will lock
in open and closed positions)
j
Fits into the shirt pocket: rugged transport case with cord take-up
(145 x 75 x 27 mm)
j
High efficiency and powerful reproduction
j
Balanced and detailed sound image for all types of music
j
Rugged and durable: robust steel headband with metal joints,
steel-reinforced headband ends, connection to the ear cups
tested for durability
Technical Data
Frequency response ..................... 15–27,000 Hz (–10 dB/1 kHz)
Transducer principle.................................................. dynamic, open
Nominal impedance ....................................................................32 Ω
Characteristic SPL .....................................114 dB (at 1 kHz, 1 V
rms
)
THD ...............................................................................................0.1 %
Ear coupling ...................................................................... supra-aural
Weight (without cable)................................................ approx. 60 g
Connector ................................................... 3.5 mm stereo jack plug
Connection cable........................................1.4 m, OFC copper cable
15-27,000 Hz 32 Ω < 0.1 % 60 g
3.5 mm OFC 1.4 m
Replacement Parts
j
Ear pads (1 pair) Cat. No. 089331
j
Headband padding Cat. No. 088115
j
Bag (137 x 32 x 65 mm) Cat. No. 088191

Sennheiser PX 100 Specifications

General

Frequency Response	15 - 27, 000 Hz
Impedance	32 Ohms
Sound Pressure Level (SPL)	114 dB
Weight	60 g (without cable)
Cable Length	1.4 m
Total Harmonic Distortion (THD)	< 0.1%
Type	Open-back, dynamic
Connector	3.5mm

Summary

General Description

Features

Replacement Parts

Technical Data

Frequency Response

Frequency range of the headphones from 15 to 27,000 Hz.

Transducer Principle

Dynamic, open transducer principle for sound reproduction.

Nominal Impedance

The electrical resistance of the headphones is 32 Ohms.

Characteristic SPL

Sound pressure level is 114 dB at 1 kHz and 1 Vrms.

THD

Total harmonic distortion is less than 0.1%.

Ear Coupling

Supra-aural ear cups that rest on the ear.

Weight (without cable)

The headphones weigh approximately 60 grams without the cable.

Connector

Features a 3.5 mm stereo jack plug for connection.

Connection Cable

Includes a 1.4 meter OFC copper cable.