How do I set up the RS 175 wireless headphones?
Please check out our Set Up Tutorial video: RS 175
OVERVIEW OF SET UP STEPS
Step 1: Remove all components from the box. These will include transmitter/charging station,
headphones, power cable, audio cable, batteries and adapters.
Step 2: Insert the batteries into the headphones.
Step 3: Use the power cable to connect the transmitter/charger to an electrical outlet.
Step 4: Charge the headphones. The charge indicator light will illuminate to indicate charging.
NOTE: The batteries in the headphones should be charged for 16 hours initially.
Step 5: Use the audio cable connect the transmitter/charger to the audio OUTPUT on the audio
source. NOTE: Depending on your audio source you may be connecting into a 3.5mm
headphone jack, red and white RCA audio outputs or a digital output.
Step 6: Turn on your audio source.
Step 7: Turn on your headphones which in turn will turn on your transmitter. The LED on the
headphones will illuminate and start blinking and the LED on the transmitter will light up and
remain solid.
Step 8: Wait 30-60 seconds for the wireless signal between the headphones and transmitter to be
established and then you will have audio.
What is the difference between RS 175 and TR 175 and HDR 175?
The RS 175 is the model number refers to the complete wireless headphone system. This system
consists of the transmitter (TR 175) and headphones (HDR 175).
What should I do if my RS 175 transmitter will not turn on?
With the RS 175 turning on the headphones activates the transmitter. To turn on the headphones
press and hold the power button on the headphones for three (3) seconds.
When the headphones are on the LED on the headphones will light up and the transmitter will
activate and hence the LED on the front of the transmitter will light up GREEN.
How do I connect to a DirecTV Genie Client box?
To Next Page
Need help?
General
Weight and Dimensions
