EasyManua.ls Logo

Sennheiser RS Series User Manual

Sennheiser RS Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MARQUE: SENNHEISER
REFERENCE
: CASQV RS 140
CODIC
: 1093975
Question and Answer IconNeed help?

Do you have a question about the Sennheiser RS Series and is the answer not in the manual?

Sennheiser RS Series Specifications

General IconGeneral
BrandSennheiser
ModelRS Series
CategoryHeadphone
LanguageEnglish

Summary

FAQ Foire aux questions

Headphones Shutting Off

Addresses headphones shutting off after minutes of silence from the audio source.

Audio Source Volume Adjustment

Explains adjusting TV volume or connecting directly to cable/satellite receiver.

Interference Issues

Troubleshoots sound cutting out when moving or turning head, suggesting wireless interference.

Audio Output Location

Locates audio output ports, usually on the back of the TV.

No Sound After Connection

Addresses no sound issue, explaining connection to audio input instead of output.

Câbles/Cables

Connecting Audio Cables

Guide on connecting audio cables to the TV's audio output for best results.

Piles/Batteries

Inserting Batteries

Instructions on how to insert the included batteries into the headphones.

Recharge/Charge

Initial Battery Charging

Instructions to charge the batteries for 24 hours before first use for RS 12x, 13x, 14x models.

Volume

Adjusting Volume Level

Guidance on setting the volume to a medium level initially, with readjustment later.

Marche-arrêt/On-off

Powering On Devices

Instructions to turn on the sound source and the headphones.

Réception/Reception

Tuning Receiver Channel (RS 11x, 12x)

How to adjust the receiver channel using the TUNE control on the headphones.

Réception/Reception

Auto-Tuning Function (RS 13x, 14x)

Activating auto-tuning by pressing the TUNE button and repeating for other channels if needed.

En cas de problèmes... If problems occur...

Troubleshooting Steps

Check connections, battery charge/polarity, device power, volume levels, and proximity to transmitter.

Interference and Reset

Select different channels, move transmitter away from electronics, reset system by removing batteries.

Contact Support

Contact service department if problems persist after following troubleshooting steps.

Related product manuals