Need help?Do you have a question about the Sennheiser RS 2000 and is the answer not in the manual?
General| Battery voltage | 3.7 V |
|---|---|
| Battery capacity | 350 mAh |
| Battery recharge time | 3 h |
| Continuous audio playback time | 9 h |
| Driver type | Dynamic |
| Magnet type | Neodymium |
| Ear coupling | Intraaural |
| Headphone frequency | 15 - 16000 Hz |
| Total Harmonic Distortion (THD) | 0.5 % |
| Manual | Yes |
| Modulation | FSK |
| Receiver weight | 60 g |
| Power consumption (standby) | 0.5 mA |
| Product color | Black |
| Wearing style | Stethoset |
| Recommended usage | Music |
| Sound pressure level (max) | 125 dB |
| Signal-to-Noise Ratio (SNR) | 85 dB |
| Cables included | Audio (3.5mm) |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Frequency band | 2.4 - 2.483 GHz |
| Wireless range | 50 m |
| Connectivity technology | Wired & Wireless |
| Microphone type | Not available |
Weight and Dimensions| Depth | 23 mm |
|---|---|
| Width | 102 mm |
| Height | 265 mm |
Essential guidelines to prevent injuries and health issues from product use.
Precautions to avoid damaging the product or causing malfunctions.
Specific safety warnings and guidelines for the product's rechargeable batteries.
Instructions on selecting an optimal location and setting up the transmitter.
Guidance on how to connect the transmitter to various audio output sources.
Instructions for connecting the transmitter to a power source.
Steps for charging the stethoset receiver's internal battery.
How to power on and activate the wireless headphone system.
To Next Page