Sennheiser RS 2000 - Overview of the TR 2000 Transmitter

Product overview
8|RS 2000
Overview of the TR 2000 transmitter
1 Battery LED
(see page14)
2 Transmitter status LED
(see below)
3 Charging contacts for
stethoset receiver with
holding magnets
4 Charging compartment for
stethoset receiver
5 DC 5V 1A socket for the power
supply unit, marked yellow
6 Analog 3.5 mm In analog
audio input (3.5 mm jack
socket), marked blue
Transmitter status LED The transmitter...
... is in standby mode.
... and the stethoset receiver are
connected.
4
3
2
1
6
5
1A