Why is there no sound in my Sennheiser Headsets?
If you're not getting any sound from your Sennheiser Headsets, here are a few things to check: * Ensure the transmitter or headphones are switched on. * Verify the plug is properly connected. * Make sure the audio source is on. * Confirm the audio source is connected to the correct connection. * The audio cable may be defective, try replacing it or selecting a different connection.
What to do if the sound is too low on my Sennheiser RS 220?
If the sound from your Sennheiser Headsets is too low, the signal from the audio source might be too weak. Try increasing the volume of the audio source. Alternatively, the LEVEL control dial might be turned too far in the '-' direction; try turning it in the '+' direction.
What to do if I have occasional sound dropouts on my Sennheiser RS 220?
Occasional sound dropouts on your Sennheiser Headsets may occur because the headphones are out of range. Try reducing the distance between the headphones and the transmitter.
How to fix sound only on one ear with Sennheiser Headsets?
If you're only getting sound in one ear with your Sennheiser Headsets, the balance might be misadjusted, so adjust the balance. Also, the audio cable could be defective, so replace the cable. Finally, check that the RCA plug of the audio connection cable is properly connected.
What to do if the sound is too distorted on my Sennheiser RS 220?
If the sound from your Sennheiser Headsets is too distorted, it could be that the signal from the audio source is too strong. Reduce the signal level using the LEVEL control dial. Alternatively, the LEVEL control dial might be turned too far in the '+' direction; try turning it in the '-' direction.
General| Battery type | BA 200 (930 mAh, 1.2V)) |
|---|---|
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Battery charge indicator | Yes |
| Continuous audio playback time | 8 h |
| Product type | Headphones |
| Product color | Black |
| Wearing style | Head-band |
| Recommended usage | Music |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Cables included | Coaxial, RCA |
| Receiver weight | 484 g |
| Frequency band | 2.4 GHz |
| Connectivity technology | Wireless |
| Microphone type | Not available |
Weight and Dimensions| Weight | 329 g |
|---|
Advice on protecting hearing and avoiding interference with medical devices.
Guidelines on temperature, environment, and power supply unit risks.
Defines proper usage and limitations of the product.
Safety instructions and warnings for NiMH rechargeable batteries.
Overview of the system components and sound quality.
Highlights digital link, transducer quality, ease of setup, and multi-user support.
Lists all items included in the product package.
Identifies and describes the parts of the headphones.
Identifies and describes the parts of the transmitter.
Explains the meaning of LEDs on headphones and transmitter.
Guidance on choosing a suitable location for the transmitter.
Instructions for connecting various audio sources like RCA, SCART, digital.
Guide to using the transmitter in a signal chain.
Steps for connecting the power supply and charging headphone batteries.
Guidance on properly adjusting the headband for fit and comfort.
Instructions for powering the transmitter on and its initial status indicators.
Explains and details how to activate or deactivate loop through mode.
Procedure to turn off the transmitter and its standby/loop through states.
Instructions for powering the headphones on and off, including auto-off.
How to choose or switch between connected audio inputs.
How to adjust the transmitter signal level for optimal analog sound.
Instructions for controlling audio volume and left/right balance on headphones.
Steps to pair an additional set of headphones with the transmitter.
Precautions and methods for cleaning the product safely.
Procedure for replacing depleted batteries in the headphones.
Instructions for replacing worn-out ear pads on the headphones.
Troubleshooting guide for common sound-related problems.
Troubleshooting guide for non-sound related issues like power or connectivity.
Technical data for the wireless headphone system.
Technical data for the TR 220 transmitter unit.
Technical data for the HDR 220 headphones.
Technical data for the PSM11R-090 power supply.
Details about product warranty and regulatory compliance.
Instructions for proper recycling and disposal of batteries and electronics.
Certification marks and numbers for various countries.
Declarations regarding FCC and Industry Canada compliance and usage.
Information on radio frequency exposure limits and safe usage.
Specific compliance statement for Industry Canada regulations.
To Next Page
