Need help?Do you have a question about the Sennheiser SET 250 and is the answer not in the manual?
General| Type | Wireless |
|---|---|
| Modulation | FM |
| Input voltage | 5 V |
| THD, total harmonic distortion | <0.5% |
| Operating time | Up to 12 hours |
| Charging time | typ. 3 hrs |
| Carrier frequencies | 863 – 865 MHz |
Infra-red mono sound transmission. System consists of TI 250 transmitter and RI 250 receiver for mono TV sets.
Infra-red stereo sound transmission. System consists of TI 500 transmitter and RI 500 receiver for stereo TV or HiFi systems.
Connect the transmitter to your TV or HiFi system's headphone socket using the supplied cable.
Adjust the volume to a middle position; the transmitter has automatic modulation control.
Use the control to switch on the receiver and adjust the volume. Efficient volume compression system.
Consult your Hi-Fi or TV manual for volume control details and loudspeaker settings.
Infra-red mono sound transmission system using TI 250 transmitter and RI 250 receiver for mono TV sets.
Infra-red stereo sound transmission system using TI 500 transmitter and RI 500 receiver for stereo TV or HiFi systems.
To Next Page