Features—Benets
• New, higher subcarrier frequencies to avoid interference with uorescent lighting
• Easy to install
• Master system can be used independently for up to 750 sq. ft. of coverage
• SZI 30 slave emitters offer increased coverage
• Connects to line level audio source via 1/8" or 1/4" plug unbalanced
• 1-year warranty
Technical Data
MF dnabediw noitaludoM
zHk 05± noitaived lanimoN
zHM 8.2 ,zHM 3.2 seicneuqerf reirraC
tekcos saxeT nip-3 tupni FA
AF input voltage for nominal deviation 45 mV–4 V (automatic modulation control)
zH 000,81–03 esnopser ycneuqerf FA
THD (1 kHz, nom. dev.) ≤ 1 %
AF signal-to-noise ratio ≥ 60 dB(A) rms
kcaj onom "8/1 tuptuo FR–tupni FR
05 .xorppa ecnadepmi tuptuO Ω
11 sedoid RI
Max. coverage area approx. 80 m, single-chn.
Radiating power approx. 0.5 W
tekcos saxeT nip-2 aiv CD V 72–42 egatlov gnitarepO
Am 081 .xorppa noitpmusnoc tnerruC
45.3 x 89. x 46.4 .xorppa sehcni ni snoisnemiD
zo 39.4 .xorppa thgieW
Product Variants
SZI 30 Emitter
IR Wideband Modulator with Integral Radiator
NOTE: Power supply is not included. Please order as required.
Radiator cluster with four IZK 20 clamps and IZM 20
cluster mounting kit
Back view of SI 30
Front view of SI 30
SI 30
The SI 30 is a wideband modulator with an integral radiator. It can be switched between
operation on channel 1 (2.3 MHz), channel 2 (2.8 MHz) and stereo operation. Due to its
compact size and relatively low radiating power, the SI 30 modulator/radiator and the SZI
30 radiator are an ideal choice for smaller or medium-sized rooms, for covering recesses
or for applications which require transmission of audio information to well dened zones,
e.g. in museums.
To Next Page
Need help?
General
