Need help?Do you have a question about the Sennheiser SL Tablestand 153-S DW and is the answer not in the manual?
General| Color | Black |
|---|---|
| Height Adjustment | No |
| Type | Table stand |
| Mounting Options | Tabletop |
| Power Supply | No |
Automatic search for free transmission frequencies for quick setup.
Direct connection of antenna wall mounts to receivers.
Using combiners with AWM 2/4 for multiple receivers.
Mounting antennae on the front of a rack using GA 4 kit.
Mounting antennae at the rear of a rack.
Detailed information on installation and usage of the rack receiver.
Identification of front panel components, controls, and rear panel ports.
Network IP assignment via DHCP, Auto IP, or Fixed IP.
Understanding display elements and navigating receiver menus.
Adjusting audio, system, and network settings for the receiver.
Details on the handheld transmitter's features and operation.
Identification of transmitter components, controls, and power management.
Information on the bodypack transmitter's features and usage.
Identification of transmitter components, controls, and power management.
Connecting clip-on or headset microphones to the transmitter.
Details on the wireless table stand's features and operation.
Details on the wireless table stand's features and operation.
Identification of components, controls, and charging methods.
Connecting microphone and switching unit on/off/muting.
Details on the wireless boundary microphone's features and operation.
Identification of components, controls, and charging methods.
Switching unit on/off and muting procedures.
Information on factory pre-pairing and establishing new radio links.
How to check which transmitter is paired with a receiver.
Step-by-step guide to establish new radio links.
Features and benefits of the omni-directional condenser headset microphone.
Connecting cable, adjusting boom, neckband, and microphone position.
To Next Page
