Need help?Do you have a question about the Sensaphone 1800 and is the answer not in the manual?
General| Brand | Sensaphone |
|---|---|
| Model | 1800 |
| Category | Measuring Instruments |
| Language | English |
Details on 47 CFR Part 68, Certification Number, and REN.
Compliant cords, jacks, usage on coin units, and network impact.
Meaning of certification and ensuring connection to telecom company facilities.
Importance of proper grounding for utility, phone lines, and water pipes.
Acceptance, terms, conditions, remedies, and exclusions.
Key capabilities including zones, monitoring, and communication options.
Diagram and description of unit's physical layout and connections.
Information for obtaining technical assistance and troubleshooting.
Unit placement, temperature range, and mounting instructions.
Proper grounding for protection and locking the enclosure.
Steps to turn on the unit and details on battery backup.
Connecting to phone lines, line seizure, and sensor wiring.
How to use keypad for programming, aborting, and error handling.
Acknowledging alarms and a sequence for initial setup.
Setting zone types like NO/NC, thermistor, or 4-20mA sensors.
Manually setting zone types, essential for 10K thermistors.
Control over zone alarm detection and dialout.
Setting temperature readings to Fahrenheit or Celsius.
Defining upper/lower range values for 4-20mA sensor zones.
Setting time for alarm recognition and threshold limits.
Calibrating sensors and adjusting sound sensitivity.
Designating zones as unused and using exit delay feature.
Configuring the unit's internal clock/calendar for event time-stamping.
Recording custom ID and zone messages for alarm notifications.
Programming a unique identification number for the unit.
Setting up to eight phone numbers for alarm notification calls.
Configuring numeric and alphanumeric pager notifications.
Options for pauses, waiting, blind dialing, and testing dialouts.
Programming codes to acknowledge alarms and viewing alarm history.
Configuring tone/pulse dialing, rings, call delay, and intercall times.
Managing call progress, message repetitions, and maximum calls.
Using with answering devices and setting listen-in duration.
Securing the keypad and silencing the unit's speaker.
Enabling alarm acknowledgment via callback.
Programming the relay output to activate based on specific alarm conditions.
Manually switching the relay output on or off via keypad or phone.
Stages of an alarm: recognition, notification, acknowledgment.
How the unit sends alarms via different communication methods.
Steps for acknowledging alarms for voice, pager, and automatic calls.
Obtaining status reports and using touch-tone commands remotely.
Solutions for dialout failures, answering issues, and voice mute problems.
Resolving issues with temperature limits, sensor readings, and calibration.
Addressing problems with 4-20mA ranges, wiring, and power.
Solutions for false sound alarms or lack of sound detection.
Troubleshooting incorrect zone status, power failures, and battery drain.
To Next Page
